Although printer issues are frequent, but your canon printer printing blank pages might be extremely perplexing for the majority of people.
If you are having this issue with your Canon printer printing blank pages, read this article to understand what to do.
A Canon printer may print blank pages if a cartridge breaks, the ink level is low, or the print head is clogged with spent ink.
This article will examine steps to fixing a Canon printer printing blank pages and incorrect color.
To solve any of this issue, keep reading and putting the simple steps into practice.
Read Also: 11 Best Cheapest Wireless Mouse For Gaming and Office Use
Why Does Your Canon Printer Prints Blank Pages
The Canon printer may be printing blank pages for the reasons listed below:
- An out-of-date printer driver
- A scarcity of ink
- Dirty print heads
- Problems with the hardware and software
- There can be a default in the Canon printer’s printer
drivers or hardware.
- The printer you are utilizing could potentially be at fault.
- Another potential cause of this issue is some faulty
software. - The cartridge might not have been placed correctly, which
could cause a problem.
How to Fix Printer Printing Blank Pages on Your Canon Printer
To quickly fix the Canon printer generating blank pages issue, use the below solutions:
1. Restart the Printer From Canon
Restart the Canon printer if it is printing nothing but blank pages. Sometimes a clean restart will solve momentary problems. By pushing the Power button, turn off the Canon printer to restart it.
- Disconnect the wall outlet from the Canon printer.
- Wait a few minutes before reconnecting and turning on the printer.
- Try printing a test page now, and if the Canon printer once more prints blank sheets, move on to the next fix.
2. Clear The Printer Head Clog
On occasion, ink can jam the printer. As a result, blank pages could print from the printer. Therefore, clean the Canon printer head to get rid of allthe remnants of old ink.
- After opening the printer, carefully detach the printer head.
- To clean the printer head and clogged pores, you may also attempt the automatic cleaning procedure.
- The printer head is extremely fragile, so handle it with special care. Once thoroughly cleaned, turn on the printer.
- Check the ink cartridges next if the issue continues.
3. Ink-cartridge Checks
Ensure that there is sufficient ink in the cartridges for printing. The printer will only produce blank pages if the ink cartridges are running low.
Remove the ink cartridges and shut off the printer. Ink the empty cartridges and refill them. Replace any damaged cartridges you notice.
Carefully reinstall the cartridge in its slot. When you insert the ink cartridges, you should hear a clicking sound.
Always choose a new cartridge before the old one dries out and is fully depleted of ink. Ink-level warnings from your printer will appear.
To install the toner or ink cartridges correctly, carefully review the installation instructions that came with the printer.
Use the appropriate ink cartridge at all times to nearly eliminate the possibility of nozzle blockage. So, give authentic Canon ink a shot in your printer.
4. Examine the Documents You Print
The document you’re attempting to print may be already blank. To find and publish the appropriate results once more
5. Execute the Windows Printer Troubleshooter
When the Canon printer is not working properly and printing blank pages, you can use the built-in printer troubleshooter in Windows to fix the issue.
Follow these instructions to do that:
- Enter Troubleshoot in the Windows search box to get started.
- Choose the option to troubleshoot settings.
- After that, select Additional Troubleshooters.
Windows additional troubleshooter
- Locate the Printer and launch the troubleshooter by scrolling down.
- To finish the procedure, adhere to the on-screen directions.
6. Reinstall or Update the Drivers for Your Canon Printer
Your printer may be malfunctioning and print blank pages if you are still using an old printer driver. Try upgrading or reinstalling the Canon printer drivers in this case:
- Pick Device Manager from the list by performing right-clicking on the Windows Start button.
- Double-click on the Print Queues section after locating it.
- Click the Canon printer with the right mouse button, then select Update driver.
Update Printer Driver
- Select the option to automatically search for drivers next.
- To complete the process, adhere to the on-screen instructions.
If the issue persists after a driver update, reinstall the Canon printer drivers by following the instructions below:
- Select the Uninstall device option after expanding the Print Queues section.
- Uninstall Printer Driver Canon
- Complete the process by adhering to the on-screenVinstructions.
- Contact Canon Printer Customer Service if the aforementioned steps did not solve your printer-related issue.
- Declare your issue and use the advice of the professionals to resolve it.
8. Get in touch with Canon Printer Support
Contacting canon support team is the best course of action for any additional Canon printer issues. Visit the Canon website to get in touch with them.
Read Also: The Five Steps to Connecting Your WiFi Network to Your Laptop
How to Fix Canon Printer Not Printing Color Correctly
If you frequently use a Canon Printer, issues like a Canon Printer not printing color correctly are rather common when using printing services.
If you keep getting this problem messages, there could be a lot of reasons for this which include the following:
- The system contains a defective printer driver.
- Printer cartridges that are empty or have low ink
- Paper jamming
- Incorrect installation of printer firmware
- Canon Printer Setup Errors
- Compatibility issues
- Because of a dirty and broken printer head.
- When printing with duplicate ink.
- The printer tray isn’t filled with enough paper.
- As a result of a Wi-Fi connectivity issue
However, if you wish to resolve this problem with your Canon printing device, you’ll need to do a few straightforward troubleshooting steps.
1.Verify That Your Ink Cartridge Is Operating Properly
If the ink drum is old or the ink level is low, users won’t get good printing results. To fix a low ink cartridge problem, check the amount of ink in your cartridge first.
If it reads low or empty, immediately replenish the cartridge with fresh, appropriate ink. Here’s how to diagnose the issue and address it:
- Open the door to your printing device as the first and most crucial step.
- The cartridge should then be carefully removed.
- Then, fill any empty cartridges with the proper link and check the ink level.
- After that, put the printer cartridge back where it belongs and print a test page to check your output quality.
If your Canon printer is still unable of printing in color, move on to the next step.
2. Install the Most Recent Printer Driver by Downloading It
To utilize your printer and start printing, you must have the printer driver. As a result, Canon printer not printing color will happen if the driver is out-of-date, improperly installed, or broken.
The most recent version that is compatible with your model and operating system must be upgraded first.
On the other hand, you can download and install the printer driver directly from the manufacturer’ website. If this doesn’t solve your problem, kindly proceed to the next step.
3. Check Your Color Printing Settings
If your Canon printer doesn’t have the color printing option turned on, you won’t be able to print in color.
To do this, follow the procedures listed below to make the section for color printing options available:
- First and foremost, click the Start button on your computer.
- After that, select the Settings tab.
- The drop-down menu can be used to choose Printers and
Scanners. - Select your printer device from the list of available
printers after that. - Choose the Properties tab next.
- Next, check to see if the color printing option is on or
disabled. First, enable it if it isn’t already. - Immediately print a test page.
If the issue with your Canon printer not printing in color has not been resolved, move on to the next step.
4. Restart Your Printer in the Last Case
A restart of your Canon printer might fix a variety of technical issues. As a result, you need to restart your Canon printer as soon as the color printing stops.
To check if the problem has been fixed, run a printing test.
Frequently Asked Questions
Why Does My Canon Printer Use Ink but Just Print Blank Pages?
If the print head is obstructed or the drivers are out-of-date, a Canon printer may generate blank pages.
Why Won’t Anything Print on Paper With My Canon Printer?
Check the ink level, replace any broken cartridges, clean the print head, and update the printer drivers if the Canon printer is not printing anything on the paper.
How Can a Canon Printhead Be Cleaned?
The Canon printhead can be cleaned with hot water and a lint-free cloth.
Why Do My Canon Printer’s Prints Appear to Be In Grayscale?
To make sure that the ink is being discharged properly, the nozzle check pattern should be produced.
Whether pages are produced improperly as a result of the nozzle check operation, check the color ink tanks to see whether any of the missing colors are a result.
There is a possibility that the Print Job will suffer if the issue persists. Get in touch with a Canon customer service agent right away.
Why Isn’t the Printing on My Canon Printer Crisp?
It frequently results from a dried-out or blocked print head within your printer. Like those in most printers, Canon print heads can clog as dried ink or dust builds up in the nozzle.
Why Does My Computer Only Produce Black and White Prints?
Lower-level causes, a clogged print nozzle, or another hardware problem could all be at fault.
A print nozzle cleaning feature ought to be offered by the printer software or driver if the issue still exists after you’ve changed the color ink cartridge.
Why Doesn’t My Canon Printer Accurately Print in Color?
If the nozzle check pattern prints improperly, it’s conceivable that one or more of the ink tanks storing the required colors are empty.
If there is enough ink in the printer but it still won’t print, try cleaning the print head and printing the file once again.
Check to determine if the ink is being properly ejected by cleaning the print head and printing the nozzle check pattern if there is enough ink in the printer but it still won’t print.
Read Also: How To Fix Incoming Call Busy Problems On Android and iPhone
To Sum Up
I sincerely hope this article will be as helpful as possible for Canon printers that print blank pages and Canon Printer Not Printing Color Correctly.
If you utilize a Canon printer regularly, you may run into several technical issues. There are many reasons why the Canon printer won’t print, and you must promptly fix the issues to enjoy your printing process.
Please share your thoughts on the comments area on any problems or queries you may have with your printer and whether the aforementioned fixes have helped you fix your Canon printer.
RELATED POST
15 best Lenovo laptops, from ThinkPad to Legion (2023)
5 Easy Steps To Connect Your Laptop To The Internet Using Your Mobile Phone’s Bluetooth
Best ASUS Laptops Specifications and Prices
Top 10 Best 3D Printers Under $500
15 Best HP Laptops In Nigeria and their Prices